會員中心 | English | 繁體中文

E型槽銷半長錐槽 [Table 6] ASME B 18.8.2 - 2000 (R2010)

選擇規格尺寸點擊↓

1/32

3/64

1/16

5/64

3/32

7/64

1/8

5/32

3/16

7/32

1/4

5/16

3/8

7/16

1/2

ASME B 18.8.2 - 2000 (R2010) E型槽銷半長錐槽 [Table 6]

尺寸單位: inch

美標ASME B18.8.2 - 2000 (R2010) ASME18.8.2 E型槽銷半長錐槽 [Table 6]

掃一掃分享

公差

公稱直徑

1/32

3/64

1/16

5/64

3/32

7/64

1/8

5/32

3/16

7/32

1/4

5/16

3/8

7/16

1/2

公稱直徑
d	最大值
	最小值
c	公稱
R	最大值
	最小值

0.0312	0.0469	0.0625	0.0781	0.0938	0.1094	0.1250	0.1563	0.1875	0.2188	0.2500	0.3125	0.3750	0.4375	0.5000
0.0312	0.0469	0.0625	0.0781	0.0938	0.1094	0.1250	0.1563	0.1875	0.2188	0.2500	0.3125	0.3750	0.4375	0.5000
0.0297	0.0454	0.0610	0.0766	0.0923	0.1074	0.1230	0.1543	0.1855	0.2168	0.2480	0.3105	0.3730	0.4355	0.4980
-	-	0.0065	0.0087	0.0091	0.0110	0.0130	0.0170	0.0180	0.0220	0.0260	0.0340	0.0390	0.0470	0.0520
-	-	0.088	0.104	0.135	0.150	0.166	0.198	0.260	0.291	0.322	0.385	0.479	0.541	0.635
-	-	0.068	0.084	0.115	0.130	0.146	0.178	0.240	0.271	0.302	0.365	0.459	0.521	0.615

替代列表

ASME B 18.8.2 - 2000(R2010) ASME B 18.8.2 - 2020

同版本產品組

ASME B 18.8.2 - 2000 (R2010)

彈性圓柱銷 [Table 10]

供應商(1)

ASME B 18.8.2 - 2000 (R2010)

倒角和不倒角圓柱銷 [Table 5]

供應商(1)

ASME B 18.8.2 - 2000 (R2010)

卷制彈性圓柱銷 [Table 11]

供應商(1)

ASME B 18.8.2 - 2000 (R2010)

T型頭槽銷 [Table 8]

ASME B 18.8.2 - 2000 (R2010)

H型半長槽銷 [Table 6]

ASME B 18.8.2 - 2000 (R2010)

E型槽銷半長錐槽 [Table 6]

ASME B 18.8.2 - 2000 (R2010)

A型槽銷全長錐槽 [Table 6]

ASME B 18.8.2 - 2000 (R2010)

F型全長槽銷 [Table6]

ASME B 18.8.2 - 2000 (R2010)

淬硬圓柱銷 [Table 3]

ASME B 18.8.2 - 2000 (R2010)

圓頭槽銷 [Table 7]

ASME B 18.8.2 - 2000 (R2010)

圓錐銷 [Table1]

ASME B 18.8.2 - 2000 (R2010)

淬硬圓車制圓柱銷 [Table2]

ASME B 18.8.2 - 2000 (R2010)

G型槽銷 [Table 6]

ASME B 18.8.2 - 2000 (R2010)

圓柱銷-無淬硬 [Table 4]

引用參考

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

注：技術數據僅供參考，請以官方原件為準！

類似標準及供貨信息

1	[國標] GB /T 13829.1 - 2004	槽銷帶導桿及全長平行溝槽 Grooved Pin, Full Length Parallel Grooved with Pilot 供應商(2)
2	[國標] GB /T 13829.2 - 2004	槽銷帶倒角及全長平行溝槽 Grooved Pin, Full Length Parallel Grooved with Chamfer 供應商(3)
3	[國標] GB /T 13829.3 - 2004	槽銷中部槽長為1/3全長 Grooved Pins-One-Third-Length Centre Grooved 供應商(3)
4	[國標] GB /T 13829.4 - 2004	槽銷中部槽長為1/2全長 Grooved Pins - Half-Length Centre Grooved 供應商(1)
5	[國標] GB /T 13829.1 (A) - 1992	A型-帶導桿及全長平行溝槽的槽銷. Grooved Pin, Full Length Parallel Grooved with Pilot 供應商(2)
6	[國標] GB /T 13829.1 (B) - 1992	B型-帶倒角及全長平行溝槽槽銷. Grooved Pins-full-length Parallel Grooved, with Chamferw 供應商(3)
7	[國標] GB /T 13829.1 (C) - 1992	C型-中部帶1/3全長平行溝槽的槽銷 Grooved Pins-one-third-length Centre Grooved 供應商(3)
8	[國標] GB /T 13829.1 (D) - 1992	D型中部帶1/2全長平行溝槽的槽銷 Grooved Pins - Half-length Centre Grooved 供應商(1)
9	[德標] DIN 1469 - 2012	帶頸配合槽銷，溝槽長為全長1/2 Grooved Pins, Half Length Grooved with Gorge 供應商(1)
10	[德標] DIN 1469 - 2011	帶頸配合槽銷 Grooved Pins, Half Length Grooved with Gorge 供應商(1)
11	[德標] DIN 1469 - 1978	帶頸配合槽銷 Grooved Pins, Half Length Grooved with Gorge 供應商(1)
12	[德標] DIN 1470 - 1978	帶導桿及全長平行溝槽的槽銷 Grooved pin, full length parallel grooved with pilot 供應商(1)
13	[德標] DIN 1473 - 1978	帶倒角及全長平行溝槽的槽銷 Grooved Pins, Full Length Parallel Grooved with Chamfer 供應商(2)
14	[德標] DIN 1475 - 1978	槽銷，中部槽長為1/3全長 Grooved Pins - 1/3 Length Centre Grooved 供應商(2)
15	[國際] ISO 8739 (RN) - 2025	帶導桿及全長平行溝槽, 倒圓端 Pin with Pilotpoint and Rounded Ends 供應商(1)
16	[國際] ISO 8740 (RN) - 2025	帶倒角及全長平行溝槽槽銷-倒圓端 ? Pin with chamfered point and rounded ends (RN) 供應商(2)
17	[國際] ISO 8739 - 1997	槽銷—帶導桿及全長平行溝槽 Grooved Pins-Full-Length Parallel Grooved, with Pilot 供應商(1)
18	[國際] ISO 8740 - 1997	帶倒角及全長平行溝槽槽銷 Grooved Pins-Full-Length Parallel Grooved, with Chamfer 供應商(2)
19	[國際] ISO 8742 - 1997	中部帶1/3全長平行溝槽的槽銷 Grooved Pins-One-Third-Length Centre Grooved 供應商(1)
20	[國際] ISO 13672 (RN) - 2025	槽銷半長平行溝槽末端倒圓 Parallel Grooved Pins - Half-length Diamond Grooves - Rounded Ends
21	[國際] ISO 13672 (CH) - 2025	槽銷半長平行溝槽末端倒角 Parallel Grooved Pins - Half-length Diamond Grooves - Chamfered Ends
22	[國際] ISO 8739 (CH) - 2025	帶導桿及全長平行溝槽, 倒角端 Pin Pilot Point and with Chamfered Ends
23	[國際] ISO 8740 (CH) - 2025	帶倒角及全長平行溝槽槽銷-倒角端 Pin with Both Chamfered Points (CH)
24	[國際] ISO 8743 - 1997	中部帶1/2全長平行溝槽的槽銷 Grooved Pins-Half-Length Centre Grooved
25	[美標] ASME/ANSI B 18.8.100M (B18.8.9M T5) - 2000 (R2005)	米制半長溝槽槽銷 TYPE 43-1 / TYPE 43-2 [TABLE 5] Metric, Grooved Pins with Half-length Groove, TYPE 43-1 / TYPE 43-2 [TABLE 5]
26	[美標] ASME/ANSI B 18.8.100M (B18.8.9M T3) - 2000 (R2005)	米制全長平行溝槽槽銷 TYPE 39 / TYPE 40 [Table 3] Grooved Pins, Full-length Parallel Grooved - Metric Series, TYPE 39 / TYPE 40 [Table 3]
27	[美標] ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005)	米制中部槽長1/3全長平行溝槽槽銷 TYPE 42 [TABLE 4] Metric, Grooved Pins with One Third Length Groove in the Middle, TYPE 42 [TABLE 4]
28	[美標] ASME/ANSI B 18.8.100M (B18.8.9M T4) - 2000 (R2005)	米制中部帶1/2全長平行溝槽槽銷 TYPE 43 [TABLE 4] Metric Grooved Pins, Half-length Centre Grooved, TYPE 43 [TABLE 4]
29	[歐標] EN 28740 - 1992	槽銷全長平行溝槽帶倒角 Full-Length Parallel Grooved, with Chamfer
30	[歐標] EN 28743 - 1992	中部帶1/2全長平行溝槽的槽銷 Grooved Pins - Half-Length Centre Grooved
31	[法國] NF E 25-750 - 1997	中部帶1/2全長平行溝槽的槽銷 Grooved Pins. Half Length Centre Grooved
32	[法國] NF E 25-761 - 1997	槽銷帶導向的全長平行槽 Grooved Pins - Full-length Parallel Grooved, With Pilot
33	[法國] NF E 25-763 - 1997 (R2002)	中部帶1/3全長平行溝槽的槽銷 Grooved Pins. One-Third-Length Centre Grooved
34	[法國] NF E 25-772 - 1997 (R2002)	帶倒角及全長平行溝槽的槽銷 Grooved Pins. Full Length Paralled Grooved, with Chamfer
35	[美標] SAE J 494 (C) - 2004	C型槽銷 Grooved Straight Pins - Type C
36	[美標] SAE J 494 (E) - 2004	E型槽銷 Grooved Straight Pins - Type E
37	[美標] SAE J 494 (F) - 2004	F型槽銷 Grooved Straight Pins - Type F
38	[德標] DIN EN ISO 8739 - 1998	帶導桿及全長平行溝槽的槽銷 Grooved Pin, Full Length Parallel Grooved with Pilot 供應商(1)
39	[德標] DIN EN ISO 8740 - 1998	帶倒角及全長平行溝槽的槽銷 Grooved Pins. Full-Length Parallel Grooved, with Chamfer 供應商(2)
40	[德標] DIN EN ISO 8742 - 1998	槽銷，中部帶1/3全長平行溝槽 Grooved Pins - 1/3 Length Centre Grooved 供應商(2)
41	[德標] DIN EN ISO 8743 - 1998	槽銷中部槽長為1/2全長 Grooved Pins - Half-Length Centre Grooved
42	[歐標] EN ISO 8743 - 1997	中部帶1/2全長平行溝槽的槽銷 Grooved Pins - Half-Length Centre Grooved
43	[美標] ASME B 18.8.2 - 2020	F型全長槽銷 [Table 8-1] Grooved Pins - Type F
44	[美標] ASME B 18.8.2 - 2020	H型半長槽銷 [Table 8 -1] Grooved Pins - Type H
45	[美標] ASME B 18.8.2 - 2020	G型槽銷 [Table 8 -1] Grooved Pins - Type G
46	[美標] ASME B 18.8.2 - 2020	E型槽銷半長錐槽 [Table 8 -1] Grooved Pins - Type E
47	[美標] ASME B 18.8.2 - 2000 (R2010)	H型半長槽銷 [Table 6] Grooved Pins - Type H
48	[美標] ASME B 18.8.2 - 2000 (R2010)	F型全長槽銷 [Table6] Grooved Pins - Type F
49	[美標] ASME B 18.8.2 - 2000 (R2010)	G型槽銷 [Table 6] Grooved Pins - Type G
50	[航空] HB 858 - 1990	D型導正銷

E型槽銷 半長錐槽 [Table 6] ASME B 18.8.2 - 2000 (R2010)

同版本產品組

引用參考

E型槽銷半長錐槽 [Table 6] ASME B 18.8.2 - 2000 (R2010)