會員中心 | English | 繁體中文

滾花高頭臺階螺釘 DIN 464 - 1986

查看供應商

選擇規格尺寸點擊↓

M1.2

M1.4

M1.6

M2.5

(M3.5)

M10

括號內尺寸為非優選

尺寸單位: mm

模型下載替

掃一掃分享

公差公制螺紋極限尺寸米/英制螺紋對照螺紋直徑與受力截面積最小破壞扭矩牌號等級毛坯直徑

千件重及價格計算千件重 : kg x 元/kg = 元/千件

默認密度 g/cm³

螺紋尺寸
d

M1.2

M1.4

M1.6

M2.5

(M3.5)

M10

P
b	最大值
	最小值
d_k	公稱
	最大值
	最小值
d_s	最大值=公稱
	最小值
h	公稱
	最大值
	最小值
k	最大值=公稱
	最小值
n	最大值
	公稱
	最小值
t	最小值
	最大值
c
r
x	最大值

0.25	0.25	0.3	0.35	0.4	0.45	0.5	0.6	0.7	0.8	1	1.25	1.5
3.5	4	4.6	5.7	6.8	8.9	10	11.2	13.4	16.6	20	26.5	33
3	3.5	4	5	6	8	9	10	12	15	18	24	30
5.50	6	7	7.5	9	11	12	14	16	20	24	30	36
5.74	6.24	7.29	7.79	9.29	11.35	12.35	14.35	16.35	20.42	24.42	30.42	36.5
5.26	5.76	6.71	7.21	8.71	10.65	11.65	13.65	15.65	19.58	23.58	29.58	35.5
2.80	3	3.5	3.8	4.5	5	6	7	8	10	12	16	20
2.55	2.75	3.2	3.5	4.2	4.7	5.7	6.64	7.64	9.64	11.57	15.57	19.48
3.50	4	4.7	5	5.3	6.5	7.5	8.5	9.5	11.5	15	18	23
3.74	4.24	4.94	5.24	5.54	6.79	7.79	8.79	9.79	11.85	15.35	18.35	23.42
3.26	3.76	4.46	4.76	5.06	6.21	7.21	8.21	9.21	11.15	14.65	17.65	22.58
1.50	1.5	2	2	2	2.5	2.5	3	3.5	4	5	6	8
1.25	1.25	1.75	1.75	1.75	2.25	2.25	2.75	3.2	3.7	4.7	5.7	7.64
0.30	0.4	0.4	0.4	0.5	0.6	0.8	0.8	1	1.2	1.6	2	2.5
0.36	0.46	0.46	0.46	0.56	0.66	0.86	0.86	1.06	1.26	1.66	2.06	2.56
0.50	0.6	0.6	0.6	0.7	0.8	1	1	1.2	1.51	1.91	2.31	2.81
0.70	0.8	0.9	1	1.1	1.5	1.8	2	2.2	2.8	3.5	4.5	6
0.90	1	1.15	1.3	1.4	1.8	2.2	2.5	2.7	3.4	4.3	5.5	7
①	①	①	①	①	0.3	0.3	0.3	0.3	0.3	0.5	0.6	0.8
0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	1	1	2	2
0.75	0.75	0.9	1.05	1.2	1.35	1.5	1.8	2.1	2.4	3	3.75	4.5

千件鋼制重≈kg

①,邊緣倒角

替代列表

DIN 465 - 1963 DIN 465 - 1970 DIN 464 - 1970 DIN 464 - 1986 DIN 464 - 2007

技術條件和引用標準

材料

鋼

不銹鋼

有色金屬

通用要求
螺紋	公差
	標準
機械性能 ^④	等級
	標準
公差	產品等級
	標準
表面處理 ^⑤	-
	-
驗收及包裝
備注

DIN 267 part 1
≤ M1.4：6h ≥ M1.6：6g^①
DIN 13 part 15
鋼St^②	A1-50，C4-50	CuZn = 銅鋅合金^③
DIN 1651^②	DIN 267 part 11	DIN 267 part 18
≤ M1.4：F ≥ M1.6：A
DIN 267 part 6，ISO 4759 part 1
不經處理	blank	blank
電鍍 DIN 267 Part 9 DIN 267 Part 19 shall apply with regard to permissible surtace discontinuities. DIN 50942 shall apply with regard to phosphating of metals.
DIN 267 part 5^⑥
① Applies only for screws without surface protection. 6g makes it possible for normal coating thicknesses to be applied in accordance with DIN 267 Part 9 with the reference line (h position) not being exceeded. The coating thickness may require a fundamental deviation larger than that specified for the g position, which however may impair the resistance to stripping of the bolt / nut assembly. ② St = 9 SMnPb 28 K as specified in DIN 1651 or an equivalent steel in terms of strength, This material shall also be used in cases where property class 5.8 is given in existing documentation. ③ CuZn = CU2 or CU3 (as specified in DIN 267 Part 18). at the manufacturer's discretion. ④ Other property classes or materials shall be subject to agreement. ⑤ R^z 25 or R^z 16 shall apply for the surface roughness, as appropriate. R^z 16 for thread flanks of sizes not exceeding M5, R^z 40 for thread flanks in the case of machine cut threads exceeding size M5 and R^z 100 for thread ends. ⑥ AQL (acceptable quality level) 1 shall appy for major characteristics and AQL1.5 for minor characteristics, thread size d and the straight knurl being regarded as major characteristics, lengths L and h, collar diameter, ds, and external diameter, dk, as minor characteristics.

引用參考

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

GB /T 3106 - 2016

緊固件 - 螺栓、螺釘和螺柱 - 公稱長度和螺紋長度 (ISO 888:2012, MOD)

GB /T 3 - 1997

普通螺紋收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 5779.1 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 一般要求

GB /T 5779.3 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 特殊要求

注：技術數據僅供參考，請以官方原件為準！

告訴我在“易緊通”看到，將給您優惠

溫州克行通緊固件有限公司

聯系人：鄭先生

348380714 移動電話： 15888456007 電話：0577-86500901

材質：不銹鋼表面處理：鍍鋅、發黑，各按客戶要求加工定制，支持非標。

[詢價]

余姚市鴻特盛金屬制品有限公司

聯系人：馬華珍/徐天陽移動電話： 13095941973, 18268663653 電話：0574-62761228

材料：不銹鋼A2-70，A2-80，A4-70，A4-80，A2（302,303,304），A4(316)，410，430 公稱范圍：規格齊全

[詢價]

深圳煜之峰五金制品有限公司

聯系人：莊宏偉移動電話： 13008864675 電話：0755-89505088

材質：碳鋼、合金鋼、不銹鋼、銅、鋁、鈦；規格范圍：M0.6~M6；公稱長度：1~50mm；表面處理：鍍鋅、鎳、鋅鎳合金、電泳、達克羅、CD紋、PVD等。

[詢價]

類似標準及供貨信息

1	[國標] GB 834 - 1988	滾花高頭螺釘 Knurled Thumb Screws 供應商(1)
2	[國標] GB 835 - 1988	滾花平頭螺釘 Knurled Screws 供應商(2)
3	[國標] GB 839 - 1988	滾花頭不脫出螺釘 Knurled Thumb Screws with Waisted Shank 供應商(1)
4	[國標] GB /T 2163 - 1991	機床夾具零件及部件活動手柄壓緊螺釘 The Parts and Units of Jigs and Fixtures Movable Handle Holddown Screw
5	[國標] GB /T 836 - 1988	滾花小頭螺釘 Knurled Screws with Small Head
6	[國標] GB /T 840 - 1988	塑料滾花頭螺釘 Plastic Diamond Knurlhead Screws
7	[德標] DIN 464 - 2007	滾花高頭臺階螺釘 Knurled Thumb Screws, High Type 供應商(3)
8	[德標] DIN 653 - 2006	薄型滾花手擰螺釘 Knurled Thumb Screws, Low Type 供應商(1)
9	[德標] DIN 7964 (F) - 1990	粗牙不脫出螺栓和螺釘 - 滾花高頭臺階螺釘 Reduced Shanke Bolts and Screws with Coarse Thread - Knurled Thumb Screws, High Type 供應商(2)
10	[德標] DIN 653 - 1986	平頭滾花螺釘, 薄型 Knurled Thumb Screws, Thin Type 供應商(1)
11	[德標] DIN 464 - 1970	滾花高頭臺階螺釘 Knurled Thurmb Screws, High Type 供應商(3)
12	[德標] DIN 465 - 1970	高型開槽滾花頭螺釘 Slotted Knurled Screws-High Style 供應商(3)
13	[德標] DIN 465 - 1963	高型開槽滾花頭螺釘 Slotted Knurled Screws-High Style 供應商(3)
14	[德標] DIN 6367 - 2003	套式銑刀刀桿用銑刀緊固螺絲, 十字頭螺釘（手擰螺釘） Cutter Retaining Screws for Milling Machine Arbors
15	[機械行業] JB /T 8026.3 - 1999	圓柱頭調節支承 Adjustable Cylindor Head Supporters
16	[機械行業] JB /T 9162.14 - 1999	帶孔滾花螺釘 Knurled Screws with Radial Holes
17	[機械行業] JB /T 9162.15 - 1999	壓緊螺釘 Clamping Screw
18	[機械行業] JB /T 9162.16 - 1999	滾花圓柱頭螺釘 Knurled Head Cap Screws
19	[法國] NF E 27-170 - 1974	滾花頭臺階螺釘 Knurled Thurmb Screws
20	[臺灣] CNS 4658 - 1984	T形旋柄螺釘 Rotary Handle Screws - T Type
21	[航天] QJ 2381 - 1992	滾花頭不脫出螺釘 Knurled thumb screws with waisted shank
22	[航天] QJ 2384 - 1992	滾花高頭螺釘 Knurled thumb screws
23	[航空] HB 306 - 1987	滾花圓柱頭緊定螺釘