會員中心 | English | 繁體中文

全螺紋六角頭細牙螺栓 A級和B級 DIN 961 - 1990

選擇規格尺寸點擊↓

M10

M12

M14

M16

M18

M20

M22

M24

M27

M30

M33

M36

M39

M42

M45

M48

M52

括號內尺寸為非優選

尺寸單位: mm

德標DIN 961 - 1990 DIN961 961DIN 全螺紋六角頭細牙螺栓 A級和B級

掃一掃分享

單重計算公差最小破壞扭矩牌號等級

千件重及價格計算千件重 : kg x 元/kg = 元/千件

默認密度 g/cm³

螺紋規格
d

M10

M12

M14

M16

M18

M20

M22

M24

P	螺距	細牙1
		細牙2
a	最大值
c	最小值
	最大值
d_a	最大值
d_w	A級	最小值
	B級	最小值
e	A級	最小值
	B級	最小值
k	公稱
	A級	最小值
		最大值
	B級	最小值
		最大值
k₁	最小值
r	最小值
s	最大值=公稱
	A級	最小值
	B級	最小值

1	1	1.5	1.5	1.5	2	1.5	2	2
-	1.25	1.25	-	-	1.5	2	1.5	1.5
3	3.75	4.5	4.5	4.5	6	6	6	6
0.15	0.15	0.15	0.15	0.2	0.2	0.2	0.2	0.2
0.6	0.6	0.6	0.6	0.8	0.8	0.8	0.8	0.8
9.2	11.2	13.7	15.7	17.7	20.2	22.4	24.4	26.4
11.6	15.6	17.4	20.5	22.5	25.3	28.2	30	33.6
11.4	15.4	17.2	20.1	22	24.8	27.7	29.5	33.2
14.38	18.9	21.1	24.49	26.75	30.14	33.53	35.72	39.98
14.2	18.72	20.88	23.91	26.17	29.56	32.95	35.03	39.55
5.3	6.4	7.5	8.8	10	11.5	12.5	14	15
5.15	6.22	7.32	8.62	9.82	11.28	12.28	13.78	14.78
5.45	6.58	7.68	8.98	10.18	11.72	12.72	14.22	15.22
5.06	6.11	7.21	8.51	9.71	11.15	12.15	13.65	14.65
5.54	6.69	7.79	9.09	10.29	11.85	12.85	14.35	15.35
3.54	4.28	5.05	5.96	6.8	7.8	8.5	9.6	10.3
0.4	0.4	0.6	0.6	0.6	0.6	0.8	0.8	0.8
13	17	19	22	24	27	30	32	36
12.73	16.73	18.67	21.67	23.67	26.67	29.67	31.61	35.38
12.57	16.57	18.48	21.16	23.16	26.16	29.16	31	35

千件鋼制重≈kg

螺紋規格
d

M27

M30

M33

M36

M39

M42

M45

M48

M52

P	螺距	細牙1
		細牙2
a	最大值
c	最小值
	最大值
d_a	最大值
d_w	A級	最小值
	B級	最小值
e	A級	最小值
	B級	最小值
k	公稱
	A級	最小值
		最大值
	B級	最小值
		最大值
k₁	最小值
r	最小值
s	最大值=公稱
	A級	最小值
	B級	最小值

2	2	2	3	3	3	3	3	3
-	-	-	-	-	-	-	-	-
6	6	6	9	9	9	9	9	9
0.2	0.2	0.2	0.2	0.3	0.3	0.3	0.3	0.3
0.8	0.8	0.8	0.8	1	1	1	1	1
30.4	33.4	36.4	39.4	42.4	45.6	48.6	52.6	56.6
-	-	-	-	-	-	-	-	-
38	42.7	46.6	51.1	55.9	59.9	64.7	69.4	74.2
-	-	-	-	-	-	-	-	-
45.2	50.85	55.37	60.79	66.44	71.3	76.95	82.6	88.25
17	18.7	21	22.5	25	26	28	30	33
-	-	-	-	-	-	-	-	-
-	-	-	-	-	-	-	-	-
16.65	18.28	20.58	22.08	24.58	25.58	27.58	29.58	32.5
17.35	19.12	21.42	22.92	25.42	26.42	28.42	30.42	33.5
11.7	12.8	14.4	15.5	17.2	17.9	19.3	20.9	22.8
1	1	1	1	1	1.2	1.2	1.6	1.6
41	46	50	55	60	65	70	75	80
-	-	-	-	-	-	-	-	-
40	45	49	53.8	58.8	63.1	68.1	73.1	78.1

千件鋼制重≈kg

①,材料：
a)鋼，性能等級(材料)：d≤39mm：5.6,8.8,10.9; d > 39mm：按協議。標準DIN ISO 898-1
b)不銹鋼，性能等級(材料)：d≤20mm：A2-70，A4-70; 20mm 39mm: 按協議。標準DIN 267-11
c)有色金屬，性能等級(材料)：按協議。標準DIN 267-18
注：DIN ISO 898-1和DIN 267-11規定的性能等級符號也可用于d>39mm以上的規格，前提是產品具有指定給該符號的所有性能

替代列表

DIN 961 - 1990 DIN EN ISO 8676 - 2011

等效標準

國標 GB	國際 ISO	德標 DIN	歐標 EN
GB /T 5786	ISO 8676	DIN EN ISO 8676	EN 28676

以上有部分標準可能為近似等效，如有異議以標準原件為準

技術條件和引用標準

材料

鋼

不銹鋼

有色金屬

通用要求
螺紋	公差
	標準
機械性能	等級
	標準
公差	產品等級
	標準
表面處理	-
	-
表面粗糙度
表面缺陷
驗收及包裝
備注

DIN 267 part 1
6g^①
DIN 13 part 12,15
d ≤ 39mm：5.6，8.8，10.9 d＞39mm：按協議	d≤ 20mm：A2-70，A4-70 20mm＜d ≤ 39mm：A2-50，A4-50 d＞39mm：按協議	按協議
DIN ISO 898 part 1	DIN 267 part 11	DIN 267 part 18
A：d ≤ 24mm, 且L ≤ 10d或150mm B：d＞24mm，或L＞10d或150mm
ISO 4759 part 1
不經處理	blank	blank
8.8：blackened （thermally or chemically）電鍍 DIN 267 part 9
DIN 267 part 2
DIN 267 part 19
DIN 267 part 5
① Only for screws without surface protection. 6 g makes it possible for normal coating thicknesses to be applied in accordance with DIN 267 part 9, the reference line not being exceeded. Depending on the coating thickness required, a larger fundamental deviation shall be selected than that for the g position. This might, however, impair the resistance to stripping of the bolt / nut assembly.

引用參考

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

GB /T 3106 - 2016

緊固件 - 螺栓、螺釘和螺柱 - 公稱長度和螺紋長度 (ISO 888:2012, MOD)

GB /T 12603 - 2005

金屬熱處理工藝分類及代號

GB /T 3 - 1997

普通螺紋收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 5779.1 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 一般要求

GB /T 5779.3 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 特殊要求

GB /T 3103.1 - 2002

緊固件公差（螺栓、螺柱、螺釘和螺母）

GB /T 34632 - 2017

統一螺紋搓制和滾制前的毛坯直徑

注：技術數據僅供參考，請以官方原件為準！

類似標準及供貨信息

1	[國標] GB /T 5785 - 2016	六角頭螺栓細牙 A級和B級 Hexagon Head Bolts - Fine Pitch Thread - Product Grades A and B 供應商(5)
2	[國標] GB /T 5785 - 2000	六角頭螺栓細牙 A級和B級 Hexagon Head Bolts - Fine Pitch Thread - Product Grades A and B 供應商(5)
3	[國標] GB 5785 - 1986	六角頭螺栓 - 細牙 - A級和B級 Hexagon Head Bolts - Fine Pitch Thread - Product Grade A and B 供應商(5)
4	[德標] DIN 960 - 1990	六角頭細牙螺栓 A級和B級 Hexagon Head Bolts with Fine Pitch Thread - Product Grades A and B 供應商(1)
5	[國際] ISO 8676 - 2022	細牙全螺紋六角頭螺栓 A級和B級 Hexagon Head Screws, with Fine Pitch Thread - Product Grades A and B
6	[國際] ISO 8765 - 2022	細牙六角頭螺栓 A級和B級 Hexagon Head Bolts with Fine Pitch Thread - Product Grades A and B
7	[國際] ISO 8676 - 2011	六角頭螺栓細牙全螺紋 Hexagon Head Screws with Metric Fine Pitch Thread - Product Grades A and B
8	[國際] ISO 8765 - 2011	細牙六角頭螺栓 A級和B級 Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and B
9	[國際] ISO 8676 - 1999	細牙六角頭螺栓 Hexagon Head Screws with Metric Fine Pitch Thread - Product Grades A and B
10	[國際] ISO 8765 - 1999	細牙螺紋六角頭螺栓.產品等級A和B級 Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and B
11	[歐標] EN 28765 - 1992	六角頭螺栓細牙產品等級：A級和B級 Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and B
12	[歐標] EN 28676 - 1991	六角頭螺釘細牙產品等級A和B Hexagon Head Screws with Metric Fine Pitch Thread - Product Grades A and B
13	[意大利] UNI 5738	細牙六角頭螺栓 A級和B級 Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and B
14	[法國] NF E 25-151 - 2001	細牙六角頭螺釘全螺紋 Hexagon Head Screws with Metric Fine Pitch Thread - Product Grades A and B
15	[法國] NF E 25-152 - 2001	米制細牙螺紋六角頭螺栓 Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and B
16	[化工] HG /T 20613 (GB5785) - 2009	六角頭粗桿半牙螺栓(細牙),產品等級A級和B級 Hexagon Bolts, Fine Thread, Product Grade A and B
17	[臺灣] CNS 4320 - 1987	六角頭螺栓精制及半精制細牙 Hexagon Head Bolts, Finished and Semi-finished, Fine Thread
18	[臺灣] CNS 4321 - 1987	六角頭全螺紋螺栓精制及半精制細牙 Hexagon Bolts with Thread Approximately to Head, Finished and Semi-finished, Fine Thread
19	[俄標] GOST R 50790 - 1995	細牙六角頭螺栓 A級和B級 Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and B
20	[俄標] GOST R 50795 - 1995	細牙六角頭全螺紋螺栓 A級和B級 Hexagon Head Screws with Metric Fine Pitch Thread - Full Threaded, Product Grades A and B
21	[建筑] JG /T 5057.6 - 1995	建筑機械與設備高強度全螺紋細牙六角頭螺栓 Construction Machinery and Equipment - High Strength Bolts with Hexagon Head - Fine Pitch Thread - Full Thread
22	[美標] SAE AS 9283 (B) - 1999 (2015)	六角頭螺栓 1900-32 UNJF-3A，最小125 KSI，UNS G87400鋼，黑色氧化物，PD柄 Bolt Machine - Hexagon Head, PD Shank, Black Oxide, Steel UNS G87400, 125 KSI Min, 1900-32 UNJF-3A
23	[德標] DIN EN ISO 8765 - 2011	六角頭細牙螺栓 A級和B級 Hexagon Head Bolts with Fine Pitch Thread - Product Grades A and B 供應商(1)
24	[德標] DIN EN ISO 8676 - 2011	全螺紋六角頭細牙螺栓 A級和B級 Hexagon Head Bolts with Fine Pitch Thread - Product Grades A and B

全螺紋六角頭細牙螺栓 A級和B級 DIN 961 - 1990

相關材料標準或牌號

技術條件和引用標準

引用參考